Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in New Deal, TX
We provide independent HeatShield service across New Deal, TX, and the one thing that makes our HeatShield work here different is dust. New Deal sits on the South Plains where dry, windy springs push fine red field dust into chimney caps and flues, and that grit bonds with creosote into a glaze that ordinary brushes skate right over. We clean HeatShield-lined chimneys with that glaze in mind, then inspect the liner surface for the cracking and separation it can hide. Our technicians have up to 12 years of experience. Chimney Sweep Lubbock is an independent HeatShield service provider, not affiliated with or authorized by the manufacturer. Call (855) 617-0455 for a free estimate.
Why New Deal Residents Choose Us for HeatShield Service
HeatShield is a flue resurfacing system, and resurfacing work rewards familiarity. We work with HeatShield liners regularly, so we know how the cement-based product behaves inside the older masonry chimneys common around New Deal, and where it tends to fail first. That’s practical knowledge, not a manufacturer endorsement. We’re an independent shop and we say so.
Parts matter as much as technique. We use HeatShield OEM materials for liner repairs because compatibility and longevity depend on it, and we’ll recommend a quality aftermarket cap or damper when it performs as well for less money. You get one company from inspection through repair, with no handoff to a second contractor. Scheduling is straightforward: tell us what your fireplace or wood stove has been doing, and we book the work. Call (855) 617-0455. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in New Deal
HeatShield liners fail in predictable ways, and several of those ways are sharper in New Deal than in a city with newer housing. Here’s what we run into.
- Cracking and spalling from thermal cycling. Intermittent heating, the pattern in homes that burn wood only during hard freezes and outages, cycles the liner hot and cold. That movement can crack and spall the HeatShield surface and expose the clay tiles underneath. Resurfacing restores the barrier when the tile still has structural integrity.
- Red dust bonded into creosote glaze. After a dry, windy spring, flues here collect fine red sand that has sifted through the cap. Mixed with creosote, it hardens into a glaze that standard poly brushes won’t cut. We break it down with rotary nylon tools and, where needed, chemical creosote remover.
- Original clay tile cracking revealed under the coating. Older New Deal homes often have original or retrofitted masonry fireplaces with clay tile liners that have aged. When HeatShield delaminates in sections during cleaning, the cracked tile behind it becomes visible. That’s a repair-or-reline decision, and we explain it with camera evidence.
- Moisture intrusion through crowns and flashing. Deteriorated crowns and flashing let water in, and HeatShield can soften or separate after freeze-thaw cycles. Crown repair is usually the fix that protects the liner repair.
- Glaze masking real defects. A glazed flue hides liner problems from a casual look. Level 1 inspection with proper lighting and camera work shows what’s actually there before we recommend anything.
HeatShield Service in New Deal: What Local Conditions Mean for Your Equipment
New Deal’s position on the South Plains shapes the work in a way that generic HeatShield advice misses. The town grew as a small agricultural hub, and plenty of homes sit on large lots or former farmsteads with open fields close by. During dry, windy springs, fine red dust from those fields works in through chimney caps and settles in the flue. Add sporadic winter burning, the kind that runs hard through a freeze and then sits idle for weeks, and the dust bonds with creosote into a stubborn glaze. Standard poly brushes don’t remove it, so we use specialized nylon and poly tools and sometimes chemical treatments. Left alone, that glaze masks liner defects and accelerates wear on the HeatShield surface, which is why the first cleaning of the season in New Deal is rarely a quick brush-out.
HeatShield Models & Products We Service in New Deal
We service the HeatShield liners installed in New Deal’s masonry chimneys, including HeatShield Cerfractory Flue Sealant, the HeatShield Resurfacing System, and HeatShield Insulation Mix. Each plays a different role: sealant for surface restoration, the resurfacing system for rebuilding a deteriorated flue interior, and insulation mix where the liner needs a thermal barrier around it. We assess which applies before quoting anything.
Parts selection is deliberate. HeatShield OEM materials go into liner repairs for compatibility, while caps and dampers can come from quality aftermarket sources when the performance matches and the price is better. We don’t claim factory training or certification, and we don’t sell HeatShield products. We repair, install, and service them.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in New Deal
Every job is priced per job by a written estimate, and the estimate is free. What drives the number is the condition of the flue, not the size of the house: how much glazed creosote has to come out, whether the HeatShield surface has cracked or separated, whether the clay tile behind it is sound enough to resurface, and whether crown or flashing repair is needed to stop moisture. A cleaning with a Level 1 inspection costs less than a resurfacing job; a full reline costs more. We give you the range in writing before any work begins, and we tell you plainly when something can safely wait.
Serving New Deal, TX – Our Local Coverage Area
We serve New Deal and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in New Deal
It loads them with grit. Fine red dust sifts through caps during dry, windy springs and bonds with creosote into a hard glaze that standard brushes can’t remove, and that glaze hides liner defects while accelerating wear. Specialized nylon and poly tools, plus chemical treatment when needed, are how we clean it. Call (855) 617-0455 for an exact quote – estimates are free.
Often yes, if the existing liner still has structural integrity. Resurfacing is frequently viable on aged clay tile, and it avoids the cost of a full liner replacement. When the tile is too far gone, we say so and explain why a reline is the honest answer.
Look for flaking or spalling on the liner surface, visible separation at the seams, and water staining around the crown or flashing. Those point to freeze-thaw damage and moisture intrusion. A Level 1 inspection confirms it, and camera images let you see the evidence yourself.
Once a year, and ideally before the first freeze. Sporadic long-burn use plus spring dust means buildup happens faster than a homeowner expects. Annual inspection catches cracking before it becomes a reline. Call (855) 617-0455 to book – estimates are free.
Yes. The cement-based surface is more sensitive to aggressive brushing than bare clay tile, and glazed creosote here needs rotary nylon or poly tools rather than metal. Chemical creosote remover helps on stubborn glaze. We clean to protect the coating, not just to clear the flue.
Service Areas Near New Deal
We also serve homeowners in Lubbock and Wolfforth, plus Shallowater, Slaton, Abernathy, and Ransom Canyon. If you’re outside those towns, call and we’ll tell you whether we cover your address. Our New Deal work runs alongside the same HeatShield service we provide across the region.
Book Your HeatShield Service in New Deal Today
Whether your HeatShield-lined chimney needs a cleaning, a spot repair, or a crown fix before winter, we’ll inspect it, show you what we find, and quote it in writing. Call (855) 617-0455 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Lubbock.